| | |
|
Epiglass Hobby Pack 650ml
The hobby pack is best suited to small repairs and small construction jobs.
Price: £10.99
|
|
|
|
Epiglass Small Project Pack 1.3Lt
The small project pack consists of 2 hobby packs and includes a set of HT25 dispensing pumps.
Price: £24.99
|
|
|
|
|
|
Epiglass Project Pack 5.0Lt/5.6KG approx
A versatile epoxy resin system, the 5.0 Litre Project pack is intended for use on build projects such as kit dinghys, catamarans, boat restorations or when a continuous supply is needed. Available with a standard or fast speed hardener.
Price: £74.38
|
|
Hardener Speed
Standard
Fast
|
|
Epiglass Fill and Fillet Pack
Combining 200ml each of HT220 Wood Fibres, HT330 Lightweight Fairing Powder and HT440 Filler Powder additives to allow any job to be started. 3 x 200ml.
Price: £9.99
|
|
|
|
|
|
HT770 Glass Tape per Metre
For use with Epiglass resin mix to reinforce joints in all materials and repair small areas of GRP. The weight of glass tape is 170 grammes per square metre. The tape is approximately 50mm wide, is sold by the metre and is also available by the 50M roll.
Price: £0.51
|
|
|
|
HT770 Glass Tape per 50M
For use with Epiglass resin mix to reinforce joints in all materials and repair small areas of GRP. The weight of glass tape is 170 grammes per square metre and the roll is approximately 50 metres long and 50mm wide. We also sell it by the metre.
Price: £14.81
|
|
|
|
|
|
|
HT660 Glass Cloth
This woven glass material has a soft finnish compatible with the Epiglass resin mix. It can be used for sheathing wood or repairing GRP. The cloth weight is 180 grammes per square metre and there is approximately 2 square metres of cloth, 1 metre wide.
Price: £13.16
|
|
|
|
HT50 Dispensing Pumps
Mini pumps are a convenient and easy dispensing system for Epiglass. They can be attached to the 5.0Lt project packs for ease of use and have a long working life. Pumps avoid spillage and contact of resin and hardener with skin when mixing; an important factor when using epoxy materials. Available in pairs.
Price: £14.62
|
|
|
|
|
|
|
HT25 Dispensing Pumps
Mini pumps are a convenient and easy dispensing system for Epiglass. They can be attached to mini and hobby packs for ease of use and have a long working life. Pumps avoid spillage and contact of resin and hardener with skin when mixing; an important factor when using epoxy materials. Available in pairs.
Price: £8.46
|
|
|
|
Epiglass Epoxy Solvent 500ml
Epiglass® Epoxy Solvent has been formulated for use with Epiglass Epoxy Resin in surface preparation and equipment cleaning. Epoxy Solvent should be used for wiping down surfaces prior to application of resin, glue or fairing mixes.
Price: £5.33
|
|
|
|
|
|
Epiglass HT110 1.0Lt/50gm
Epiglass® HT110 is an extender that produces a high strength epoxy glue when mixed with the Epiglass resin mix. HT110 can also be added to filler and fairing mixes to improve trowelling properties and to prevent sagging. The viscosity of the glue can be varied by the volume of Glue Powder added.
Price: £5.99
|
|
|
|
Epiglass HT220 1.0Lt/175gm
Epiglass HT220 cellulose fibre is designed for adding to glue mixes when bonding wood and especially for fillet bonding.
Price: £5.99
|
|
|
|
|
|
Epiglass HT330 1.0Lt/90gm
Fairing Powder is made from microballoons which are hollow, reddish brown phenolic spheres with extremely low density. They produce a lightweight fairing compound for use above the waterline with easy sanding properties. Glue Powder should also be used in a fairing filler mix to prevent sagging in areas of high build and to improve application properties.
Price: £7.99
|
|
|
|
Epiglass HT440 1Lt/110gm
HT440 Filler Powder's hollow glass spheres have been specially developed to produce a lightweight, light coloured, low density filling material. An extremely low moisture uptake makes it ideal for above and below the waterline. Filler Powder may also be used for fairing large areas, offering economies over the lightweight fairing powder at a slight penalty in weight and sandability.
Price: £6.99
|
|
|
|
